mBot – PM2.5 Gas Sensor Firmware Installation Instructions

mBot – PM2.5 Gas Sensor Firmware Installation Instructions

 

Step 1: Download the firmware update toolkit;

http://mblockapp.oss-cn-hongkong.aliyuncs.com/HexDownloader.zip

 

Step 2:  Unzip the zip file to get the following directory;

0

  • ino.standard.hex is the firmware for mBot with PM2.5 sensor libraries
  • Hex files and software should be placed under the English directory.

Step 3: Run the HexDownloader program;

1

 

Step 4: download;

  1. Click to load image (加载镜像HEX) and select the appropriate HEX file (mbot_firmware.ino.standard.hex);
  2. Select UNO board type;
  3. Select the serial port to which the corresponding device is connected;
  4. Click “Download”;(”下载”)

 

 

2

There will be a prompt after download is completed;

After the firmware update is complete, you can use mBlock when connecting the mBot with PM2.5 sensor blocks;