Makeblock-library-for-Arduino  V3.2.4
It's a library for arduino application developers
InfraredReceiverTest.ino
/**
* \par Copyright (C), 2012-2016, MakeBlock
* @file InfraredReceiverTest.ino
* @author MakeBlock
* @version V1.0.0
* @date 2015/09/01
* @brief Description: this file is sample code for Me Infrared Receiver device.
*
* Function List:
* 1. void MeInfraredReceiver::begin(void)
* 2. int16_t MeInfraredReceiver::read(void)
* 3. int16_t MeInfraredReceiver::available(void)
* 4. bool MeInfraredReceiver::buttonState(void)
*
* \par History:
* <pre>
* <Author> <Time> <Version> <Descr>
* Mark Yan 2015/09/01 1.0.0 rebuild the old lib
* </pre>
*/
#include "MeOrion.h"
#include <SoftwareSerial.h>
MeInfraredReceiver infraredReceiverDecode(PORT_6);
void setup()
{
infraredReceiverDecode.begin();
Serial.begin(9600);
Serial.println("InfraredReceiverDecode Start!");
}
void loop()
{
uint8_t ReceiverCode;
uint8_t buttonState;
static uint8_t PrebuttonState = 0;
buttonState = infraredReceiverDecode.buttonState();
if(PrebuttonState != buttonState)
{
PrebuttonState = buttonState;
Serial.print("buttonState 0x");
Serial.println(buttonState);
}
if(infraredReceiverDecode.available())
{
ReceiverCode = infraredReceiverDecode.read();
switch(ReceiverCode)
{
case IR_BUTTON_A: Serial.println("Press A."); break;
case IR_BUTTON_B: Serial.println("Press B."); break;
case IR_BUTTON_C: Serial.println("Press C."); break;
case IR_BUTTON_D: Serial.println("Press D."); break;
case IR_BUTTON_E: Serial.println("Press E."); break;
case IR_BUTTON_F: Serial.println("Press F."); break;
case IR_BUTTON_SETTING: Serial.println("Press Setting."); break;
case IR_BUTTON_UP: Serial.println("Press Up."); break;
case IR_BUTTON_DOWN: Serial.println("Press Down."); break;
case IR_BUTTON_LEFT: Serial.println("Press Left."); break;
case IR_BUTTON_RIGHT: Serial.println("Press Right."); break;
case IR_BUTTON_0: Serial.println("Press 0."); break;
case IR_BUTTON_1: Serial.println("Press 1."); break;
case IR_BUTTON_2: Serial.println("Press 2."); break;
case IR_BUTTON_3: Serial.println("Press 3."); break;
case IR_BUTTON_4: Serial.println("Press 4."); break;
case IR_BUTTON_5: Serial.println("Press 5."); break;
case IR_BUTTON_6: Serial.println("Press 6."); break;
case IR_BUTTON_7: Serial.println("Press 7."); break;
case IR_BUTTON_8: Serial.println("Press 8."); break;
case IR_BUTTON_9: Serial.println("Press 9."); break;
default: break;
}
}
}